Inline Water Heater

These kits comes with a water heater tank, pump, switch, interconnecting hardware, 8 feet of hose, and a 12 volt DC Contactor.

If you have ever installed a ceramic heater in your EV you know the time, effort and problems involved. In order to avoid the problems that accompany ceramic heaters we have developed a electric in-line water heating system that has a great deal of advantages over ceramic. This heater uses the existing heating system that is already in the vehicle. All that is required to install is to plumb the hose barbs into the existing heater water hoses that used to be attached to the internal combustion system and wire up a switch and inline water pump. In actual tests our single element heater will warm the air coming out of the heat duct over 70 degrees in less than 12 minutes. The brass 12 volt pump motor is extremely quiet. Less than 40 Dba. This kit is so much easier to install than other products on the market.


$535.00
This double element heater kit comes with a water heater tank, 12 volt DC pump, switch, interconnecting hardware, 8 feet of hose, and a 12 volt DC Contactor. This unit draws 26 amps of current at 120 volts when operating at hot, and it draws 12 amps at 144 volts when set at warm.
Reservoir Dimensions:8.5 x 4 x 2

$382.00
This single element heater kit comes with a water heater tank, 12 volt DC pump, switch, interconnecting hardware, 8 feet of hose, and a 12 volt DC Contactor. This unit draws 13 amps of current at 120 volts, and it draws 12 amps at 144 volts.
Reservoir Dimensions: 8.5 x 2 x 2